My shopping cart
Your cart is currently empty.
Continue ShoppingWater Filter Cartridges, Evolve+ 12 Pack, Fits Brita Maxtra+ and PerfectFit Jugs, 5 Stage Filtration System Reduces Chlorine, Limescale & Other Impurities, 12 Months Supply
dd
dd
Aqua Optima’s 5-step filtration technology, it efficiently filters the water to reduce impurities including chlorine, limescale, herbicides, pesticides, lead and heavy metals. Also reduce any microplastics from your tap water and enjoy purer, clearer, better-tasting water.
Better taste - Reduce chlorine and limescale by up to 80%, improves the taste of hot and cold drinks.
Longer appliance life – The Aqua Optima Evolve+ filter cartridges reduce limescale and thus limiting the build up inside your home appliances.
Each Filter cartridge is recommended for 100 litres of filtered water. Potentially avoiding 100 x 1 litre plastic bottles going to landfill.
The Evolve+ water filter incorporates our unique 5-step fast flow filtration system which removes high levels of impurities and microplastics from tap water.
Aqua Optima 5-Step Fast Flow Filtration System
To prepare your filter for us follow the instructions on the filter packaging or as below:
Step 1: Remove your Evolve+ filter cartridge from the packaging
Step 2: Soak your Evolve+ filter in water for 5 minutes to remove any air bubbles
Step 3: Hold your Evolve+ filter under running water for 1 minute
Your Evolve+ filter cartridge should now be ready for use
This Evolve+ Filter cartridge is compatible with all Brita Maxtra, Maxtra+ and PefectFit Jugs. For use with Brita jugs check the jug hopper type (the plastic vessel where the filter cartridge sits).
If the Brita jug has a hole in the filter mounting position simply insert your Evolve+ filter cartridge.
If there is no hole in the filter mounting position you will need to use the plastic lifter packaged with this product (see step 3). This filter is not sold or manufactured by Brita*
If you have identified that your Brita jug hopper has no hole in the mounting position you will need to use the lifter supplied with this filter pack.
Simply insert the lifter over the mounting pin and push down
Once your cartridge is prepared for use, the final step is to insert it into your filter jug, depending on type of filter it uses
CLICK TO FIT: Aqua Optima and some jugs feature a click to fit connection. Remove the water funnel and slot the filter into the underside. Rotate the filter clockwise until it clicks into place. Replace the funnel
DROP IN: Other jugs such as Brita require the filter to be dropped into the funnel. Simply fit the Evolve+ cartridge into the top of the inner vessel/funnel and secure into place
BEFORE FIRST USE: Once your Evolve+ filter is secure fill the inner vessel with water and let it pass through the filter. Once it has been filtered, discard the water. Repeat the procedure once more. Fill the vessel for a third time. Your water filter jug is now ready to use
Prepare Your Evolve+ Filter Cartridge
Check Brita Compatibility
Brita Compatible Lifter
Insert Your Evolve+ Filter
Which Jugs Are Compatible? | This Evolve+ filter is compatible with Aqua Optima, Brita Maxtra, Brita Maxtra+, Brita PerfectFit, Tesco, Wilko and all oval water filter jugs and filtered water chillers. |
Black Particles In The Water | One of the ingredients in our filter is activated carbon, which helps to reduce chlorine and organics, such as pesticides and herbicides. Normally these finer particles are flushed out during filter preparation i.e. by soaking and flushing or running the filter under a tap until clear.We recommend the following: 1) Remove the filter from the inner vessel. 2) Shake it vigorously to loosen and redistribute the filter media. 3) Rinse the filter briefly under a cold tap. 4) Refit to the inner vessel |
My Filter Is Running Slowly | It is possible for the flow routes through the active ingredient in the filter to become blocked whilst in transit or, in some cases due to excess air in the filter cartridge building up over time. We recommend the following: 1) Remove the filter from the inner vessel. 2) Shake it vigorously to loosen and redistribute the filter media. 3) Rinse the filter briefly under a cold tap. 4) Refit to the inner vessel |
My Filter Seems Too Tight | For stiff-fitting filters we recommend: 1. Turn the inner vessel upside down on a non-slip surface 2. Wet the silicon seal with water to act as a lubricant 3. Push down as you twist the cartridge into place. |
My Brita Lifter is Missing | Each pack of filers contains a Brita lifter that allows the filter to be used with Brita Maxtra & PerfectFit Jugs manufactured after June 2020. If yours is missing or you have any questions please contact our dedicated team via the Aqua Optima website |
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.